Wideband Tait equipment that cannot be narrowband-compliant
| Model | Product code | Details |
|---|---|---|
| T2000 mobile (discontinued) |
T20XX-X1X–XXX | 1 = wide band |
| T800 base station (discontinued) |
T8XX-Y0-ZZZZ | 0 = wide band |
| T5000 orca portable (discontinued) |
TOP-a1cde-mn | B = 1 for medium and wide band capable – not narrowband-capable |
Tait equipment that can achieve narrowband-compliance
The following Tait equipment is either already narrowband-compliant, or is narrowband-capable and simply requires re-programming to achieve compliance:
| Model | Product code | Details |
|---|---|---|
| T2000 mobile (discontinued) |
T20XX-X2X–XXX T20XX-X3X–XXX |
2 = narrow band (7.5 kHz capable) 3 = medium band (12.5 kHz capable) |
| T800 Series II base station (discontinued) |
T8XX-Y5-ZZZZ | 5 = narrow band (12.5 kHz capable) |
| T5000 orca portable (discontinued) |
TOP-a2cde-mn | B = 2 for universal band (narrow, medium and wide band programmable) |
| 7000 / 8000 series MPT 1327 and MPT-IP trunked analogue |
Visit the MPT 1327 and MPT-IP section for product information | Yes this series is 12.5 kHz capable. If a model is currently operating on 25 kHz, it will simply need re-programming. |
| 7000 / 8000 series conventional analogue |
Visit the conventional analogue section for product information | Yes this series is 12.5 kHz capable. If a model is currently operating on 25 kHz, it will simply need re-programming. |
| 9100 and 9400 series P25 trunked/conventional | Visit the P25 section for product information | Yes this series is 12.5 kHz capable. If a model is currently operating on 25 kHz, it will simply need re-programming. |
| 9300 series DMR trunked/conventional | Visit the DMR section for product information | Yes this series is 12.5 kHz capable. If a model is currently operating on 25 kHz, it will simply need re-programming. |
⇐ Go back to New Zealand narrowband compliance timeframe page