TM9135 Specifications Table

TM9135 Specifications (PDF)

General Performance

Frequency ranges Frequency
band+

Transmit
power
Transmit
current
(typical)
VHF 136-174MHz
25W <5.5A

136-174MHz*
50W <10.5A

136-174MHz
110W <30A
UHF 350-400MHz*
40W <8.5A

380-420MHz*
40W <8.5A

400-470MHz
25W <6.5A

450-530MHz
25W <6.5A

450-520MHz
25W <6.5A

450-520MHz
40W <8.5A

Transmit Receive


700/800MHz 762-776MHz 762-776MHz



792-825MHz
30W (<806MHz) <10A

850-870MHz 850-870MHz 35W (>806MHz) <10A
Frequency stability ±1.5ppm (-22ºF to +140ºF/-30ºC to +60ºC)
Channels/zones 1,000 channels/30 zones
Talk groups 26 talk group lists comprised of up to 50 members each
Scan groups 300 with up to 50 members each, max. of 2,000 members total
Power supply 10.8-16VDC
Channel spacing 12.5/15/20/25/30kHz
Frequency increment/channel steps 2.5/5/6.25
Dimensions (DxWxH) standard control head 1.38 x 7.24 x 2.8in (35 x 184 x 71mm)
Dimensions (DxWxH) radio body
25W 6.9 x 6.3 x 2.1in (175 x 160 x 52mm)
30/35/40/50W 7.7 x 6.3 x 2.1in (195 x 160 x 52mm)
110W 14.6 x 9.8 x 5in (370 x 250 x 121mm)
Weight control head 11.6oz (330g)
Weight radio body




25W 42.3oz (1,200g)
30/35/40/50W 49.4oz (1,400g)
110W 296oz (8,400g)
Operational temperature -22ºF to +140ºF (-30ºC to +60ºC)
Sealing IP54 dust and rain
RF connector 50 ohm BNC or Mini UHF
Interface connectors 3 Interface Connectors with Serial Ports
Analog signaling options MDC1200 encode/decode, Two Tone decode, PL (CTCSS), DPL (DCS)


Environmental Standards

Applicable MIL-STD-810C, D, E & F Method Procedure Procedure
 

25/30/35/50/110W 25/30/35/50W 110W
Low pressure 500.4 2 2
High temperature 501.4 1, 2 2
Low temperature 502.4 1, 2 2
Temperature shock 503.4 1 1
Solar radiation 505.4 1 -
Rain 506.4 1, 3 3
Humidity 507.4 1 -
Salt fog 509.4 1 1
Dust 510.4 1 1
Vibration 514.5 1 1
Shock 516.5 1, 6 6





Transmitter

Output power VHF/UHF 700/800MHz 


(TIA/EIA 102 and 603a) (TIA/EIA 102 and 603a)

25W 25W, 12W, 5W, 1W



30W
30W, 15W, 5W, 2W


35W
35W, 15W, 5W, 2W


40W 40W, 20W, 15W, 10W



50W 50W, 25W, 15W, 10W



110W 110W



Modulation limiting




25/30kHz channel ±5kHz ±5kHz


12.5kHz channel ±2.5kHz ±2.5kHz


FM hum and noise (typical)




25/30kHz channel -43dB -40dB


12.5kHz channel -38dB -33dB


Conducted emissions (typical) -85dBc -75dBc


Audio response (Analog) 300-3,000Hz +1/-3dB
Audio distortion < 3% at 1kHz 60% deviation
Transmit attack time (TIA/EIA 102) 50mS


Receiver (typical figures shown)


VHF/UHF VHF 50W VHF 110W 700/800MHz
Analog sensitivity




12dB SINAD 0.28μV
(-118dBm)
0.315μV
(-117dBm)
0.25μV
(-119dBm)
0.28μV
(-118dBm)

Digital sensitivity(TIA/EIA-102)




5%BER 0.22μV
(-120dBm)
0.233μV
(-120dBm)
0.18μV**
(-122dBm)
0.18μV
(-122dBm)

Intermodulation rejection (TIA/EIA 102) -75dB -75dB -70dB -75dB
Adjacent channel selectivity




25/30kHz channel (TIA/EIA 603a) -75dB -80dB -75dB -75dB
12.5kHz channel (TIA/EIA 102) -65dB -70dB -65dB -65dB





Spurious response rejection -75dB -90dB -70dB -75dB
FM hum and noise




25/30kHz channel -43dB -43dB -43dB -43dB
12.5kHz channel -40dB -40dB -40dB -40dB
Residual audio noise ratio 45dB 45dB 45dB 45dB
Audio distortion @ rated audio (3W) 3% @ 1kHz 60% modulation
Optional external speaker output 10W (into 4 ohms)








Regulatory Data


USA VHF CFR 47 Parts 22, 74, 90, 95J, 90.210

UHF CFR 47 Parts 22, 74, 90, 95A, 90.210

800MHz CFR47 Parts 22, 90
Canada
RSS-119
Europe
EN300 086, EN300 113


EN301 489


EN60950
Australia/New Zealand
AS/NZ54295
Type approval
FCC Industrie Canada NTIA
25W VHF CASTMAB1E 737A-TMAB1E


UHF CASTMAH5E 737A-TMAH5E



CASTMAH6E 737A-TMAH6E

30/35W UHF CASTMAK5F 737A-TMAK5F

40W UHF
n/a 350-400MHz*



n/a 380-420MHz*
40W UHF CASTMAH5F n/a



CASTMAH7F n/a

50W VHF CASTMAB1F n/a 136-174MHz*
110W (ERFPA) VHF CASTMAB1Z n/a

Emission designators 10K0F1D, 10K0F1E, 10K0F7D, 10K0F7E, 11K0F3E, 12K7F1D 16K0F3E, 6K60F2D, 7K70F1D 8K10F1D, 8K10F1E, 8K10F7D 8K10F7E, 9K60F2D





Specifications are subject to change without notice and shall not form part of any contract. They are issued for guidance purposes only.

+Please note that not all frequency bands and power outputs are available in all markets. For further information please check with your nearest Tait office or authorized dealer.

* Tait confirms that this product models conforms with NTIA requirements.
** Receiver preamplifier installed.

Please note that this product does not offer encryption capability and there is no upgrade path for this. If encryption may be required Tait recommends the TM9155 mobile radio.

The word "Tait" and the Tait logo are trademarks of Tait Ltd. Tait is an ISO 9001:2008 and ISO 14001:2004 certified supplier.

More Information

Go to the Support website for user documentation.

Read about Regulatory Compliance.
Tait ensures its products meet regulatory compliance in all of its markets.

Contact Us

Newsletter