+ All Tait Websites

Tait Communications

TB9100 Spec Sheet Table

TB9100 Specifications

General Performance †

 
Operational frequency VHF
136-174MHz
UHF
380-520MHz
700/800MHz
762-870MHz
 
Electronic switching range ≥2% of the center frequency
(e.g. 10MHz @ 500MHz)
 
Channel/network capacity 255  
Channel spacing 12.5kHz, 20kHz, 25kHz  
Channel increment 0.125kHz  
Dimensions  
HxWxD (Subrack only) 7 x 19 x 15.2in (177.8 x 482.6 x 386mm)  
HxWxD (Including front panel) 7 x 19 x 16.1in (177.8 x 482.6 x 409mm)  
Weight
(with AC and DC PMU)
  
5/50W Base station system (single channel) 47lb (21.5kg)  
100W Base station system 50.2lb (22.8kg)  
Operational temperature -22ºF to +140ºF (-30ºC to +60ºC)  
Description Modular base station/repeater/receiver  
Frequency stability ±0.5ppm (-22ºF to +140ºF/-30ºC to +60ºC)  
External reference 10MHz or 12.8MHz  
Power consumption 12V PA 12V PMU 24V PMU 48V PMU 110VAC 240VAC

Standby

Tx @ 5W

Tx @ 50W

Tx @ 100W

0.81A

2.2A

9.2A

-

1.2A

2.7A

10.0A

19.2A

0.63A

1.4A

5.4A

10.3A

0.3A

0.65A

2.6A

4.9A

-

49VA

138VA

239VA

-

118VA

177VA

262VA

Supply requirements  
Mains DC

88 to 264V (PFC Power Factor Correction)

12V, 24V, 48V (Nominal +ve or -ve earth)

 
Adjacent channel power  

Analog 20/25kHz

Analog 12.5kHz

Digital 12.5kHz

<-70dB (EIA)

<-60dB (EIA)

<-60dB (IS-102)

 
Environmental standards Applicable MIL-STD 810C, D, E and F tests  
  

Audio

 
Audio interfaces

Input
600Ω Balanced
Microphone

Output
600Ω Balanced
Monitor speaker

 
Audio interface level

-20dBm to 0dBm nominal
(300 to 3400Hz)

-20dBm to 6dBm nominal
(300 to 3400Hz)

 
  -20dBm to -14dBm nominal

(67 to 300Hz)

-20dBm to -14dBm nominal
(67 to 300Hz)

 
Frequency response +0.5/-2.0dB rel. 1kHz (300 to 3000Hz)  
Audio distortion <3% typical  
  

Transmitter

 
Modulation limiting  

12.5kHz channel

20kHz channel

25kHz channel

±2.5kHz

±4kHz

±5kHz

 
Modulation fidelity <3% (TIA-102A)  
Transmit rise time ≤2.5ms  
Transmitter power rating

Single 1/5W base station system
Single 5/50W base station system
Single 10/100W base station system

 
FM hum and noise  

12.5kHz and 20kHz channels

25kHz channel

-49.0dB (300Hz-3kHz [ANSI/TIA])

-51.5dB (300Hz-3kHz [ANSI/TIA])

 
Conducted/radiated emissions

VHF/UHF

<-36dBm 9kHz to 1GHz

<-30dBm 1GHz to 4GHz

700/800MHz

<-20dBm to 9GHz

 
Emission designators

11K0F3E, 16K0F3E, 6K60F2D, 9K60F2D

8K10F1E, 10K10F1E, 8K10F7E, 10K0F7E,

8K10F1D, 10K10F1D, 8K10F7D, 10K0F7D

 
  

Receiver

 
Analog sensitivity (12dB SINAD) <0.25μV (-119.0dBm)  
Digital sensitivity (TIA/EIA-102) 0.21μV (-120.5dBm) @ 5% BER  
Spurious emissions

Radiated

<-57dBm EIRP to 1GHz

<-47dBm EIRP above 1GHz

Conducted

<-90dBm to 1GHz

<-70dBm above 1GHz

 
Spurious response ≥100dB [ANSI/TIA]  
Intermodulation

80dB [ETSI]

85dB [ANSI/TIA]

 
Selectivity (EIA 603)

VHF/UHF

85dB (NB), 90dB (WB)

700/800MHz

79dB (NB), 84dB (WB)

 
Digital adjacent channel rejection

60dB TIA 102A + ETSI 300 -113 (across all bands)

 
   

Specifications are subject to change without notice and shall not form part of any contract. They are issued for guidance purposes only. All specifications shown are typical.

† All frequency bands and channel spacings may not be available in all markets. For further information please check with your nearest Tait office or authorized dealer.

The word "Tait" and the Tait logo are trademarks of Tait Limited. Tait is an ISO 9001:2008 and ISO 14001:2004 certified supplier.

More Information

Go to the Support website for user documentation.

Read about Regulatory Compliance
Tait ensures its products meet regulatory compliance in all of its markets.

Contact Us