Specifications
TP9155/60 Specifications
General Performance
| Frequency Ranges | Frequency Band+ | |||||||||
| VHF | 136-174MHz* | |||||||||
| UHF |
380-420MHz* 400-470MHz* 450-530MHz |
|||||||||
| 700/800MHz |
Transmit 762-776MHz 792-825MHz 851-870MHz |
Receive 762-776MHz 851-870MHz |
||||||||
| Frequency Stability | ±1.5ppm (-22ºF to 140ºF/-30ºC to 60ºC) | |||||||||
| Channels/Zones | 1,000 channels/30 zones | |||||||||
| Talk-groups | 26 talk-group lists comprised of up to 50 members each | |||||||||
| Scan Groups | 300 with up to 50 members each, max. of 2,000 members total | |||||||||
| Dimensions (DxWxH) | 1.9 x 2.6 x 6.6in (47 x 67 x 167mm) | |||||||||
|
Weight (includes NiMH battery) |
20.4oz (580g) | |||||||||
|
Weight (includes Li-Ion battery) |
16.4oz (480g) | |||||||||
| Interfaces | Four-line full dot matrix LCD | |||||||||
| Channel Spacing | 12.5/15/20/25/30kHz | |||||||||
| Frequency Increment | 2.5/5/6.25 | |||||||||
| Operational Temperature | -22ºF to 140ºF (-30ºC to 60ºC) | |||||||||
| Sealing | IP54 dust and rain | |||||||||
| Rated Audio | >500mW | |||||||||
| Analog Signaling Options | MDC1200 encode/decode, Two Tone decode, PL (CTCSS), DPL (DCS) | |||||||||
Environmental Standards |
||||||||||
|
Applicable MIL-STD-810 C, D, E & F Low Pressure High Temperature Low Temperature Temperature Shock Solar Radiation Rain Humidity Salt Fog Dust Vibration Shock |
Method 500.4 501.4 502.4 503.4 505.4 506.4 507.4 509.4 510.4 514.5 516.5 |
Procedure 2 1, 2 1, 2 1 1 1, 3 1 1 1 1 1, 4 |
||||||||
Transmitter |
||||||||||
| VHF | UHF | 700/800MHz | ||||||||
| Output Power |
5W, 3W, 2W, 1W |
4W, 2.5W, 2W, 1W | 3W, 2.5W, 2W, 1W | |||||||
| Modulation Limiting | ||||||||||
|
25/30kHz channel 20kHz channel 12.5kHz channel |
±5kHz ±4kHz ±2.5kHz |
|||||||||
| FM Hum and Noise(typical) | ||||||||||
| 25/30kHz channel 12.5/15kHz channel |
-48dB -42dB |
-41dB -37dB |
-40dB -34dB |
|||||||
| Conducted Emissions(typical) | -75dBc | -75dBc | -70dBc | |||||||
| Audio Response (Analog) | ||||||||||
|
12.5/15kHz 25/30kHz |
300-2,550Hz +1/-3dB 300-3,000Hz +1/-3dB |
|||||||||
| Audio Distortion (Analog) | <5% @ 1kHz, 60% modulation | |||||||||
|
Transmit Attack Time (TIA/EIA 102) |
50mS | |||||||||
| Duty Cycle | 1min Tx, 4min Rx for 8hrs @ 140ºF (60ºC) | |||||||||
Receiver (typical figures shown) |
||||||||||
| Analog Sensitivity | VHF/UHF | 700/800MHz | ||||||||
| 12dB SINAD |
0.28μV (-118dBm) |
0.28μV (-118dBm) |
||||||||
|
Digital Sensitivity (TIA/EIA-102) 5%BER |
0.22μV (-120dBm) |
0.22μV (-120dBm) |
||||||||
|
Intermodulation Rejection (TIA/EIA 102) |
-78dB | -78dB | ||||||||
| Adjacent Channel Selectivity | ||||||||||
|
25/30kHz channel (TIA/EIA 603) 12.5kHz channel (TIA/EIA 102) |
-73dB -63dB |
-70dB -60dB |
||||||||
| Spurious Response Rejection | -75dB | -70dB | ||||||||
|
Residual Audio Noise Ratio (TIA/EIA 102) |
45dB | 45dB | ||||||||
| Audio Distortion @ Rated Audio | <3% | <3% | ||||||||
Battery |
||||||||||
| Intelligent Battery Options |
NiMH, Standard and Intrinsically Safe (IS) 2400mAh Li-Ion, Standard and Intrinsically Safe (IS)** 2500mAh |
|||||||||
|
Battery Shift Life (NiMH/Li-Ion) |
>12 hours 5/5/90 | |||||||||
Charger |
||||||||||
|
Charger Options (NiMH/Li-Ion) |
Fast desktop smart charger 6-way multi charger Vehicle charger |
|||||||||
Regulatory Data |
||||||||||
| USA | VHF | CFR 47 Parts 22, 90.210, 74, 90 | ||||||||
| UHF | CFR 47 Parts 22, 90.210, 74, 95A, 90 | |||||||||
| 800MHz | CFR 47 Parts 22, 90 | |||||||||
| Canada | RSS-119 | |||||||||
| Europe | EN300 086, EN300 113 | |||||||||
| EN301 489 | ||||||||||
| EN60950-01 | ||||||||||
| Australia/New Zealand | A3/NZS4295 | |||||||||
| Type Approval | FCC | Industrie Canada | NTIA | |||||||
| VHF | CASTPAB1A | 737A-TPAB1A |
136-174 MHz* |
|||||||
| UHF |
CASTPAH5A CASTPAH6A |
737A-TPAH5A 737A-TPAH6A |
380-420 MHz* 400-470 MHz* |
|||||||
| 800MHz | CASTPAK5A | 737A-TPAK5A | ||||||||
| Emission Designators |
1
0K0F1D, 10K0F1E, 10K0F7D, 10K0F7E, 11K0F3E, 12K7F1D, 16K0F3E, 6K60FZD, 7K70F1D, 8K10F1D, 8K10F1E, 8K10F7D, 8K10F7E, 9K60F2D |
|||||||||
| ESD Standard | IEC 61000-4-2 | |||||||||
Specifications are subject to change without notice and shall not form part of any contract. They are issued for guidance purposes only.
+Please note that not all frequency bands are available in all markets. For further information please check with your nearest Tait office or authorised dealer.
* Tait confirms that this product model conforms with NTIA requirements.
** For Li-Ion IS battery availability, please contact your local Tait representative for more information.
The word "Tait" and the Tait logo are trademarks of Tait Electronics Ltd. Tait is an ISO 9001: 2008 and ISO 14001: 2004 certified supplier.
More Information
for user documentation.
Read about Regulatory Compliance
Tait ensures its products meet regulatory compliance in all of its markets.
DMR
