Base Station/Repeaters
General Performance |
||||||
|---|---|---|---|---|---|---|
| Operational Frequency | VHF | UHF | 700/800MHz | |||
| 136-174MHz | 380-520MHz | 762-870MHz | ||||
| Electronic Switching Range | ≥2% of the centre frequency (e.g. 10MHz @ 500MHz) | |||||
| Channel/Network Capacity | 255 | |||||
| Channel Spacing | 12.5kHz, 20kHz, 25kHz | |||||
| Channel Increment | 0.125kHz | |||||
| Dimensions | ||||||
|
HxWxD (Subrack only) HxWxD (Including front panel) |
7 x 19 x 15.2in (177.8 x 482.6 x 386mm) 7 x 19 x 16.1in (177.8 x 482.6 x 409mm) |
|||||
| Weight (with AC and DC PMU) | ||||||
|
5/50W Base Station System (single channel) 100W Base Station System |
47lb (21.5kg) 50.2lb (22.8kg) |
|||||
| Operational Temperature | -22ºF to 140ºF (-30ºC to 60ºC) | |||||
| Description | Modular Base Station/Repeater/Receiver | |||||
| Frequency Stability | ±0.5ppm (-22ºF to 140ºF/-30ºC to 60ºC) | |||||
| External Reference | 10MHz or 12.8MHz | |||||
| Power Consumption | 12V PA | 12V PMU | 24V PMU | 48V PMU | 110VAC | 240VAC |
|
Standby Tx @ 5W Tx @ 50W Tx @ 100W |
0.81A 2.2A 9.2A - |
1.2A 2.7A 10.0A 19.2A |
0.63A 1.4A 5.4A 10.3A |
0.3A 0.65A 2.6A 4.9A |
- 49VA 138VA 239VA |
- 118VA 177VA 262VA |
| Supply Requirements | ||||||
| Mains DC |
88 to 264V (PFC Power Factor Correction) 12V, 24V, 48V (Nominal +ve or -ve earth) |
|||||
| Adjacent Channel Power | ||||||
|
Analog 20/25kHz Analog 12.5kHz Digital 12.5kHz |
<-70dB (EIA) <-60dB (EIA) <-60dB (IS-102) |
|||||
| Environmental Standards | Applicable MIL-STD 810C, D, E and F tests | |||||
Audio |
||||||
| Audio Interfaces |
Input 600Ω Balanced Microphone |
Output 600Ω Balanced Monitor Speaker |
||||
| Audio Interface Level |
-20dBm to 0dBm nominal (300 to 3400Hz) -20dBm to -14dBm nominal (67 to 300Hz) |
-20dBm to 6dBm nominal (300 to 3400Hz) -20dBm to -14dBm nominal (67 to 300Hz) |
||||
| Frequency Response | +0.5/-2.0dB rel. 1kHz (300 to 3000Hz) | |||||
| Audio Distortion | <3% typical | |||||
Transmitter |
||||||
| Modulation Limiting | ||||||
|
12.5kHz channel 20kHz channel 25kHz channel |
±2.5kHz ±4kHz ±5kHz |
|||||
| Modulation Fidelity | <3% (TIA-102A) | |||||
| Transmit Rise Time | ≤2.5ms | |||||
| Transmitter Power Rating |
Single 1/5W Base Station System Single 5/50W Base Station System Single 10/100W Base Station System |
|||||
| FM Hum and Noise | ||||||
|
12.5kHz and 20kHz channels 25kHz channel |
-49.0dB (300Hz-3kHz [ANSI/TIA]) -51.5dB (300Hz-3kHz [ANSI/TIA]) |
|||||
| Conducted/Radiated Emissions |
VHF/UHF <-36dBm 9kHz to 1GHz <-30dBm 1GHz to 4GHz |
700/800MHz <-20dBm to 9GHz |
||||
| Emission Designators |
11K0F3E, 16K0F3E, 6K60F2D, 9K60F2D 8K10F1E, 10K10F1E, 8K10F7E, 10K0F7E, 8K10F1D, 10K10F1D, 8K10F7D, 10K0F7D |
|||||
Receiver |
||||||
|
Analog Sensitivity (12dB SINAD) |
<0.25μV (-119.0dBm) | |||||
| Digital Sensitivity (TIA/EIA-102) | 0.21μV (-120.5dBm) @ 5% BER | |||||
| Spurious Emissions |
Radiated <-57dBm EIRP to 1GHz <-47dBm EIRP above 1GHz |
Conducted <-90dBm to 1GHz <-70dBm above 1GHz |
||||
| Spurious Response | ≥100dB [ANSI/TIA] | |||||
| Intermodulation |
80dB [ETSI] 85dB [ANSI/TIA] |
|||||
| Selectivity (EIA 603) |
VHF/UHF 85dB (NB), 90dB (WB) |
700/800MHz 79dB (NB), 84dB (WB) |
||||
| Digital Adjacent Channel Rejection |
60dB TIA 102A + ETSI 300 -113 (across all bands) |
|||||
Specifications are subject to change without notice and shall not form part of any contract. They are issued for guidance purposes only. For further information please check with your nearest Tait office or authorized dealer.
More Information
for user documentation.
Read about Regulatory Compliance
Tait ensures its products meet regulatory compliance in all of its markets.
DMR
