TP8100
The performance figures given in these pages, unless otherwise stated, are typical figures measured in accordance with ETSI 300-086 (analogue) and ETSI 300-113 (digital). Tait Electronics Ltd reserves the right to alter these specifications.
TP8100 Specifications
TP8100 Intrinsically Safe Radios
Tait TP8100 Intrinsically Safe (IS) portable radios are essential for organizations serious about mobile communications in hazardous environments. See TP8100 IS Specification Sheet for information regarding FM-approval for IS radio models.
General Performance
| Frequency Range | VHF | UHF | 800/900MHz |
| 136-174MHz | 350-400MHz | 806-870MHz | |
| 174-225MHz | 400-470MHz | 896-941MHz | |
| 450-530MHz | |||
| Frequency Increments | 2.5kHz, 5kHz, 6.25kHz | 5kHz, 6.25kHz | |
| Channel Spacing | 12.5kHz, 20kHz, 25kHz | 12.5kHz, 20kHz, 25kHz | |
| Frequency stability | ±2ppm (-22°F to +140°F/-30°C to +60°C) | ||
|
Signalling Format - Conventional |
|||
|
CTCSS/DCS, Two Tone Encode (Type 99), Selcall, MDC1200, G-Star (Encode) |
|||
| - Trunked | MPT 1327, CTCSS, DCS (Tx only) | ||
| Presets | Conventional | Trunked | |
| TP8110 16 Channels | TP8135 100 Alphanumeric Presets | ||
| TP8115 128 Channels | TP8140 100 Alphanumeric Presets | ||
| TP8120 350 Channels | |||
| Operational Temperature | -22F to +140F (-30C to +60C) | ||
| Sealing | IP67 | ||
Military Standards 810 F* |
||
| Applicable MIL-STD | Method | Procedure |
|
Low Pressure High Temperature Low Temperature Temperature Shock Solar Radiation Rain Humidity Salt Fog Dust Vibration Shock |
500.4 501.4 502.4 503.4 505.4 506.4 507.4 509.4 510.4 514.5 516.5 |
2 1,2 1,2 1 1 1, 3 1 1 1 1 1, 4 |
* Also meets equivalent superseded MIL-STD 810 C, D & E.
User Interface
| with Li-Ion 2000mAh battery | with Li-Ion 2500mAh battery | |
| Dimensions (WxHxD) | 2.4x5.12x1.57in (61x130x40mm) | 2.4x5.12x1.77in (61x130x45mm) |
| Weight | 12.13oz (344g) | 12.87oz (365g) |
| Interfaces |
Menu driven user interface 24 character LCD display Three programmable function keys - includes emergency button Two rubber knobs (volume & channel selection) Side-mounted accessory connector Large Push-To-Talk button Stainless steel antenna connector |
|
Transmitter
| 136-174MHz | 174-225MHz | 350-400MHz | 400-470MHz | |
| RF Output Power | 5W, 2.5W, 1W | 5W, 2.5W, 1W | 4W, 2.5W, 1W | 4W, 2.5W, 1W |
| Modulation Limiting 12.5/20/25kHz channel | ±2.5/4.0/5.0kHz | ±2.5/4.0/5.0kHz | ±2.2/3.8/4.4kHz | ±2.5/4.0/5.0kHz |
| FM Hum and Noise 12.5/20/25kHz channel | 40/44/46dB | 42/45/47dB | 42/44/46dB | 36/41/42dB |
| Conducted Emissions | -39dBm (<1GHz) | 46dBm | -46.0dBm | -40.6dBm |
| -46dBm (>1GHz) | 40dBm | -40.0dBm | -40.0dBm | |
| Audio Response | +0.5, -2.5dB | +0.5, -2.5dB | +0.5, -2.5dB | +0.5, -2.5dB |
|
Audio Distortion at 1kHz with 60% modulation |
0.3% | 0.3% | 0.6% | 0.5% |
| 450-530MHz | 806-870MHz | 896-941MHz | ||
| RF Output Power | 4W, 2.5W, 1W | 3W, 2W, 1W | 3W, 2W, 1W | |
|
Modulation Limiting 12.5/20/25kHz channel |
±2.5/4.0/5.0kHz | ±2.2/3.8/4.4kHz* | ±2.2/3.8/4.4kHz* | |
| FM Hum and Noise 12.5/20/25kHz channel | 36/41/42dB | 39/44/45dB* | 40/44/46dB* | |
| Conducted Emissions | -39dBm (<1GHz) | -33dBm* | -33dBm* | |
| -46.0dBm (>1GHz) | ||||
| Audio Response | +0.5, -2.5dB | +0.5, -2.5dB* | +0.5, -2.5dB* | |
|
Audio Distortion at 1kHz with 60% modulation |
0.5% | 0.5%* | 0.5%* | |
| Duty Cycle (all bands) | 1min Tx, 4min Rx (20%) | |||
Receiver
| 136-174MHz | 174-225MHz | 350-400MHz | 400-470MHz | |
| Sensitivity (Psopho) | (20dB Pospho) | (20dB Pospho) | (20dB Pospho) | (20dB Pospho) |
| NB/MB/WB Channel | -113.5/-117.0/-117.0dBm | -115.2/-116.6/-118dBm | -116.2/-118.5/-119.3dBm | -115.5/-117.8/-118.4dBm |
|
Intermodulation Rejection NB/MB/WB Channel |
67.6/68.6/68.7dB | 66.3/67.3/66.9dB | 67.4/67.9/68.5dB | 67.4/67.9/68.1dB |
| Adjacent Channel Selectivity 12.5/20/25kHz Channel | 67.4/72.9/76.4dB | 68.0/70.5/72.0dB | 65.8/71.3/76.7dB | 67.7/73.8/76.1dB |
|
Spurious Response Rejection NB/WB Channel |
71.9/75.9dB | 75.5/77.2dB | 77.4/77.8dB | 71.8/72.7dB |
| Sensitivity (SINAD) | (12dB SINAD) | (12dB SINAD) | (12dB SINAD) | (12dB SINAD) |
| NB/MB/WB Channel | -119.5/-119.5dBm | -119.3/-119.2dBm | -120.4/-120.3dBm | -119.4/-119.4dBm |
| Intermodulation Rejection NB/MB/WB Channel | 74.3/75.4/75.4dB | 72.8/71.2/74.1dB | 74.9/75.1/75.4dB | 73.5/74.8/75.1dB |
| Adjacent Channel Selectivity 12.5/20/25kHz Channel | 68.0/73.5/76.4dB | 68.4/70.6/72.5dB | 66.7/70.7/74.6dB | 67.0/73.1/73.5dB |
|
Spurious Response Rejection NB/WB Channel |
71.9/75.9dB | 75.5/72.2dB | 77.4/77.8dB | 71.8/72.7dB |
| FM Hum and Noise 12.5/20/25kHz Channel | 40/44/45dB | 37/41/43dB | 41/43/46dB | 37/41/43dB |
| Audio Response | +0.5, -2.5dB | +0.5, -2.5dB | +0.5, -2.5dB | +0.5, -2.5dB |
| Audio Distortion @ Rated Audio | 2% | 3.2% | 1.5% | 3.2% |
| 450-530MHz | 450-530MHz | 851-870MHz | 935-941MHz | |
| Sensitivity (Psopho or SINAD) | (20dB Psopho) | (12dB SINAD) | (12dB SINAD) | (12dB SINAD) |
| NB/MB/WB (NB/WB) | -115.3/-118.0/-118.4dBm | -119.7/-119.6dBm | (-120.1/-120.5dBm)* | (-119.3/-119.3dBm)* |
|
IntermodulationRejection NB/MB/WBChannel |
67.4/68.3/68.4dB | 74.3/75.4/75.8dB | 75.3/75.8/78.2dB* | 75.4/76/77.1dB* |
|
AdjacentChannelSelectivity 12.5/20/25kHzChannel |
65.4/72.2/75.1dB | 65.2/71.9/74.5dB | 64.6/72.2/75.8dB* | 64.3/72.4/73.3dB* |
|
Spurious Response Rejection NB/WB Channel |
71.4/72.5dB | 71.4/72.5dB | 66.1/66.9dB* | 76.7/76.7dB* |
| FM Hum and Noise 12.5/20/25kHz Channel | 36/40/42dB | 37/40.3/43dB | 37/40.6/43dB | |
| Audio Response | +0.5, -2.5dB | +0.5, -2.5dB* | +0.5, -2.5dB* | |
| Audio Distortion @ Rated Audio | 3.5% | 1.5%* | 2.2%* |
Battery
| Battery | Li-lon 2000mAh Shift life (5/5/90)>11 hours |
| Li-lon 2500mAh Shift life (5/5/90)>14 hours |
Charger
| Charger Options |
Desktop fast charger Multi-way Li-lon charger |
All measurements conducted using EN 300 086-1 test method except those marked *which use TIA-603-C testing method.
Specifications are subject to change without notice and shall not form part of any contract. They are issued for guidance purposes only. Please note that not all frequency bands and power outputs are available in all markets.
More Information
for user documentation.
Read about Regulatory Compliance
Tait ensures its products meet regulatory compliance in all of its markets.
DMR
