TP7100
TP7110 specifications
The performance figures given in these pages, unless otherwise stated, are typical figures measured in accordance with ETSI 300-086 (analogue). Tait Electronics Ltd reserves the right to alter these specifications.
General Performance
| VHF | UHF | |
|---|---|---|
| Frequency Range | 136-174MHz |
420-470MHz 470-520MHz |
| Frequency Stability | ±2ppm (WB) ±1.5ppm (NB) | |
| Channels | 16 | |
| Channel Increments | 2.5kHz, 5kHz, 6.25kHz | 5kHz, 6.25kHz |
| Channel Spacing | 12.5kHz, 25kHz | 12.5kHz, 25kHz |
| Signalling Format |
Selcall 2-tone CTCSS/DCS |
|
Military Standards 810 F |
||
| Applicable MIL-STD | Method | Procedure |
| Dust Vibration Shock |
510.4 514.5 516.5 |
1 1 1, 4 |
| Operational Temperature | -30º to 60ºC (-22º to 140ºF) | |
| Standards | MIL-STD C, D, E and F | |
User Interface
| Dimensions (HxWxD) | 119 x 67 x 40mm (4.7 x 2.6 x 1.6in) | |
| Weight with Li-lon 2000mAh | 323gm (11.4oz) | |
| Interfaces |
Die cast aluminium chassis and polycarbonate chasing Two programmable function keys Two rubber knobs (volume and channel selection) Side-mounted accessory connector Large Push-To-Talk button Stainless steel antenna connector Three colour LED status indicator |
|
Transmitter |
136-174MHz | 420-470MHz | 470-500MHz |
| RF Output Power | 5W, 1W | 4W, 1W | 4W, 1W |
| Modulation Limiting | |||
|
12.5kHz channel 25kHz channel |
±2.5kHz ±5.0kHz |
±2.5kHz ±5.0kHz |
±2.5kHz ±5.0kHz |
| FM Hum and Noise (TIA-603-C test method) | |||
|
12.5kHz channel 25kHz channel |
> 38dB > 40dB |
> 38dB > 40dB |
> 38dB > 40dB |
|
Conducted Emissions <1GHz >1GHz |
<-36dBm -30dBm |
<-36dBm -30dBm |
<-36dBm -30dBm |
| Audio Response (TIA-603-Ctest method) |
+1/ -5dB/Oct (500-2500Hz) |
+1/ -5dB/Oct (500-2500Hz) |
+1/ -5dB/Oct (500-2500Hz) |
| Audio Distortion at 1kHz with 40% modulation (TIA-603-Ctest method) | < 5% | < 5% | < 5% |
Receiver |
136-174MHz | 420-470MHz | 470-520MHz |
| Sensitivity 12dB (SINAD) Typical (TIA-603-C test method) | -117.5dBm | -119dBm | -119dBm |
| Intermodulation Rejection | -65dBm | -65dBm | -65dBm |
| Adjacent Channel Selectivity | |||
|
12.5kHz channel 25kHz channel |
> 60 > 70 |
> 60 > 70 |
> 60 > 70 |
| Spurious Response Rejection | > 70dB | > 70dB | > 70dB |
| FM Hum and Noise (TIA-603-C test method) | |||
|
12.5kHz channel 25kHz channel |
> 38dB > 40dB |
> 38dB > 40dB |
> 37dB > 40dB |
| Audio Response (TIA-603-Ctest method) |
+1/-3-6dBOct (500-2500Hz) |
+1/-3-6dBOct (500-2500Hz) |
+1/-3-6dBOct (500-2500Hz) |
| Audio Distortion at Rated Audio (500W) (TIA-603-C test method) | < 5% | < 5% | < 5% |
Battery |
Li-lon 2000mAh Shift life (5/5/90) up to 10 hours |
Charger |
Desktop fast charger |
Specifications are subject to change without notice and shall not form part of any contract. They are issued for guidance purposes only. Please note that not all frequency bands and power outputs are available in all markets.
More Information
for user documentation.
Read about Regulatory Compliance
Tait ensures its products meet regulatory compliance in all of its markets.
DMR
